FLAPS Remapping in Melbourne

What is a FLAPS Remap?

FLAPS (Flap Actuator Position Sensors) are an essential component in modern vehicles, primarily found in intake manifolds, throttle bodies, and turbocharged engines. These actuators control airflow and optimize performance, emissions, and efficiency. A FLAPS remap involves recalibrating the ECU (Engine Control Unit) to disable or modify the function of the flaps, which can improve engine response, eliminate common failures, and enhance overall performance.

Why Consider a FLAPS Remap?

Many manufacturers integrate swirl flaps or intake flaps into the engine to comply with emissions regulations. However, over time, these components can become clogged, fail, or restrict airflow, leading to poor performance. A FLAPS remap helps mitigate these issues by adjusting or disabling the function of these actuators within the ECU software.

Flaps Remap Melbourne Stage 1 | Redline Performance Tuning

Benefits of a FLAPS Remap:

βœ… Prevents Expensive Repairs – Swirl flap failures can cause engine damage. Disabling them prevents breakdowns.
βœ… Improved Performance – Removing restrictions allows for better airflow and throttle response.
βœ… Increased Reliability – A remap removes problematic flaps that can wear out or stick over time.
βœ… Better Fuel Economy – Some vehicles experience improved efficiency due to optimized airflow.
βœ… Enhanced Turbo Response – Turbocharged vehicles may experience quicker boost response and smoother power delivery.

remap process

01

Initial Consultation

We discuss your performance goals and vehicle specifications.

02

Diagnostic Check

We inspect your vehicle to confirm it is suitable for remapping.

03

ECU Read

Read and backup original map data. At this point we send the map data to our engineers to modify based on your expectations.

04

REMAP

We fine-tune your ECU using cutting-edge technology.

05

Road test

We ensure the remap delivers optimal performanceΒ and perform final checks and quality assurance.

Stage 1 ECU Remap

Common Issues with Swirl Flaps & Intake Flaps

  • Failure of Actuator Motors: The motor controlling the flaps can fail, triggering fault codes and reduced power.
  • Carbon Build-up: Over time, flaps get clogged with carbon deposits, restricting airflow and leading to rough idling.
  • Loss of Performance: Faulty or restrictive flaps cause power loss, sluggish acceleration, and inefficient combustion.
  • Check Engine Light (DTC Errors): Faulty flaps often trigger DTC error codes like P2015, P2004, P2006, causing the ECU to enter limp mode.

A FLAPS remap eliminates these issues by modifying the ECU to disable the flap actuators while keeping all other engine functions running smoothly.

Why Choose Us ?

We are industry-leading ECU tuning specialists with over 20 years of experience and a proven track record of remapping over 100,000 vehicles.

Here’s why our customers trust us:

βœ” Certified & Experienced Technicians – Highly trained professionals with extensive expertise.

βœ” State-of-the-Art Tuning Software – Cutting-edge technology for precise tuning.

βœ” Custom ECU Remaps – Tailored solutions for maximum performance.

βœ” Excellent Customer Service – Dedicated support before, during, and after your remap.

βœ” Industry-Leading Warranties – Peace of mind with our warranty coverage.

βœ” Competitive Pricing – Affordable tuning solutions without compromising quality.

Audi TT Remap Dyno Tuning | Melbourne

Frequently Asked Questions

Will a FLAPS Remap Cause Any Issues?

No, a FLAPS remap is a safe modification when done correctly. It does not affect emissions compliance in most cases and eliminates the risk of flap failures.

Will It Improve Performance?

Yes, by removing airflow restrictions, your vehicle may experience better throttle response, smoother power delivery, and improved turbo efficiency.

Is a FLAPS Remap Reversible?

Yes, if needed, the remap can be reversed to restore factory settings. However, most customers prefer to keep the improved performance.

Does This Affect MOT or Emissions Tests?

In most cases, it does not. However, we always recommend a consultation to ensure compliance with local regulations.

How Long Does a FLAPS Remap Take?

The process typically takes 1-2 hours, including diagnostics, remapping, and testing.

Additional extras available

Depending on the make and model the below options can be included in our remap tuning.

βœ… ADBLUE βœ… EGR DELETE βœ… DPF DELETE βœ… DTC REMOVAL βœ… FLAPS DELETE βœ… VMAX OFF βœ… START/STOP OFF βœ… POP & BANG CRACKLE MAP βœ… TURBO ANT LAG βœ… DECAT